Inside Plant Documentation

Introduction

One of the services Communications Plant Design performs is to keep detailed building standards updated and available for campus units and outside contractors. CITES engineers document the configuration and evolution of outside and inside plant telecommunications systems using the computer-aided design (CAD) software AutoCAD. Inside plant CAD drawings are maintained for every campus building showing jack locations, conduit routes, and network Communications Equipment Rooms.

The 34 current CAD drawings are linked below.

Lead Time

Not applicable.

Policies and Procedures

As telecommunications systems are changed or updated, the AutoCAD drawings are modified to reflect their most recent state. NDO staff rely heavily on CITES Communications Plant Design's drawings to determine whether the existing cabling infrastructure is adequate or must be reinforced for the in-building network and whether and where special hardware will be required to handle distance problems.

Building standard documents are available online in a printable format. When changes occur in the documents occur, updates will be made to the online documents approximately six times a year.

Service Inquiry

For more information about these or other standard documents, contact the manager of Communications Plant Design.

Forms

Dwg. 17100-1 Typical Outside Plant Distribution Diagram
Dwg. 17100-2 Telecommunications Typical Intrabuilding Elements
Dwg. 17100-3 Telecommunications Typical Wiring Schematic
Dwg. 17100-4 Telecommunications Typical Underground Building Entrances & Conduit Profiles
Dwg. 17100-5 Telecommunications Typical Trench Profiles
Dwg. 17100-6 Telecommunications Manhole Cover Detail
Dwg. 17100-7 Telecommunications U of I Logo Manhole Cover Detail
Dwg. 17100-8 Telecommunications Manhole Cover Frame Detail
Dwg. 17100-9 Telecommunications Typical 12'x6'x7' "J" Manhole
Dwg. 17100-10 Telecommunications Emergency Phone
Dwg. 17100-11 Telecommunications Emergency Phone with Exterior Enclosure
Dwg. 17100-12 Telecommunications Emergency Phone - Flush Mount Bezel
Dwg. 17100-13 Telecommunications Emergency Phone Kiosk
Dwg. 17100-14 Telecommunications Emergency Phone Base
Dwg. 17100-15 Telecommunications Typical Intermediate Distribution Frame (IDF)
Dwg. 17100-16 Telecommunications Ground Bus Detail
Dwg. 17100-17 Telecommunications Typical IDF Wall Layout
Dwg. 17100-18 Telecommunications Typical Communications Equipment Room (CER)
Dwg. 17100-19 Telecommunications Typical Floor Distribution Frame (FDF)
Dwg. 17100-20 Telecommunications Typical Patch Panel Frame
Dwg. 17100-21 Telecommunications Typical Patch Panel
Dwg. 17100-22 Telecommunications Cable Tray Sizing Chart
Dwg. 17100-23 Telecommunications Typical Station Outlet
Dwg. 17100-24 Telecommunications Cable Identification in FDF
Dwg. 17100-25 Telecommunications Recessed Floor Station
Dwg. 17100-26 Telecommunications Typical Outlet for Modular Furniture
Dwg. 17100-27 Telecommunications Typical Wall Phone
Dwg. 17100-28 Telecommunications Pull Box Schedules
Dwg. 17100-29 Telecommunications Sleeves & Conduits through Floor
Dwg. 17100-30 Station Cable Conduit Sizing
Dwg. 17100-31 Telecommunications Typical Below Ceiling Cable Tray
Dwg. 17100-32 Telecommunications Typical Station Outlet
Dwg. 17100-33 Telecommunications Typical Station Outlet Identification
Dwg. 17100-34 Telecommunications Pin Configurations for Voice/Data Jacks

Service Charges

None. Communications Plant Design keeps these documents updated free of charge for campus and contractor use.

Last content modification April 27, 2006